Pressure Washer Repair, Warranty Service & OEM Parts | Tampa, FL

Name: Ameritech Manufacturing
Address: 14730 North Nebraska Ave, Tampa, FL, 33613, US
Telephone: (813) 978-0809
Price range: $$

Service Offerings

From pump rebuilds to engine repair, electrical service to custom modifications — all under one roof in Tampa.

🔧

Pump Rebuilds & Reseals

Full plunger pump rebuild service for Cat, General, AR, Comet, Giant, and Udor pumps. New seals, packings, valves, and o-rings. Complete operational test before return.

3–5 day turnaround

🛡️

Authorized Warranty Repair

Manufacturer-authorized warranty service for 10 major commercial brands. Warranty work is performed at no labor cost to the customer when covered by the manufacturer.

Usually no labor cost for covered warranty work

⚙️

Engine Repair & Tuneup

Full service for Honda GX series, Kohler CH/CV, Briggs & Stratton, and Vanguard commercial engines. Carb, ignition, valve adjustment, fuel system, and full tuneup.

Most tuneups less than 1 hr

⚡

Electrical & Unloader Service

Diagnosis and repair of pressure switches, unloader valves, hour meters, and 12V/24V electrical systems used on hot water pressure washers and trailers.

Diagnostic estimate first

🧊

Hose, Wand & Trigger Gun Repair

High-pressure hose recrimping, replacement, wand and lance rebuilds, trigger gun seal kits, and quick-connect fitting replacement. Walk-in service available.

Most repairs same-day or next-day

🛠️

Custom Modifications & Belt Box Install

Belt Box conversion installation, custom hose reel mounting, chemical injection upgrades, and trailer-specific modifications. Learn about the Belt Box →

1-2 hrs typical

How Service Works

Three steps from drop-off to return. Free diagnostic estimate before any work begins.

Diagnose

Drop off, schedule a pickup, or freight ship to our Tampa facility. Our technicians inspect the equipment and identify the issue. Diagnostic estimate is provided before any repair.

Quote

You receive a written estimate including labor hours, parts, and expected turnaround. Nothing is repaired until you authorize. If parts have a lead time, that's disclosed up front.

Repair & Return

Once authorized, your equipment is repaired by manufacturer-trained technicians, fully tested, and returned. Most repairs complete in 1-2 business days.

Service

Transparent pricing for the most common service jobs.

Service	Typical Time	Cost
Diagnostic estimate	1–2 business days	$49.95
	—
Pump rebuild & reseal (Cat / General / Comet / Giant)	3–5 business days
Engine tuneup (Honda / Kohler / B&S / Vanguard)	Same Day
Belt Box installation	1–2 hours
Hose recrimping	Same Day	$15-$38
Authorized warranty repair (covered brands)	Per manufacturer terms	Usually no labor cost
Trigger gun / wand rebuild	Same Day	Usually cost of components used

How estimates work: A diagnostic is performed on every machine that comes in. You receive a written estimate including labor, parts, and any part lead times before any repair work begins. All estimate charges will be credited toward the repair. No surprise charges.

Schedule Service

Drop off in Tampa, ship in from anywhere in the U.S., or arrange a pickup.

Three Ways to Get Your Equipment Repaired

Whichever option works best for your operation, our service team will confirm receipt, perform the diagnostic, and walk you through the estimate before any work begins.

Drop off in Tampa. Walk in to our 10,000 sq. ft. facility at 14730 N Nebraska Ave during business hours (Mon–Fri 7:30AM–4:30PM EST). Same-day intake.
Ship in for repair. Freight ship pumps, complete machines, or trailer-mounted equipment. Most carriers deliver curbside; our team unloads and confirms receipt.
Florida pickup service. Within Florida, we can arrange equipment pickup for larger units. Call to coordinate scheduling and rates.
Phone consultation first. Not sure if it's worth the repair? Call us — we'll talk through symptoms, estimate likely cause, and recommend whether to repair or replace.

(813) 978-0809

Mon–Fri 7:30AM–4:30PM EST · Service team available during all business hours

Service FAQ

Common questions about repair, warranty, turnaround, and pricing.

What brands does Ameritech provide warranty repair for?

Ameritech is an authorized warranty repair center for Udor, Cat Pumps, Comet, General Pump, Giant, Honda, Graco, AR, and Titan. Warranty work on these brands is performed at our Tampa, FL facility by manufacturer-trained technicians. We can typically file warranty claims directly with the manufacturer on your behalf when applicable.

How much does pressure washer repair cost?

A diagnostic estimate is provided before any work begins, so customers know exactly what the repair will cost before authorizing service. Most Warranty work covered by the manufacturer is performed at no labor cost to the customer.

Can I ship my pressure washer to Ameritech for repair?

Yes. Customers across the U.S. ship pressure washers, pumps, and complete units to our Tampa, FL service center. Drop off, schedule a pickup, or freight ship — call (813) 978-0809 to coordinate. Most repairs are completed within 1-2 business days of receipt depending on parts availability.

How long does a pump rebuild take?

Most plunger pump rebuilds (Cat, General, Comet, Udor, AR, Giant) are completed within 3–5 business days once we have your pump in-house. Standard service includes new seals, packings, valves, and o-rings, plus a complete operational test before return shipment.

Do you service pressure washers from other manufacturers?

Yes. Our service center repairs pressure washers from any manufacturer, not just Ameritech-built systems. Our technicians work on Honda, Kohler, Briggs & Stratton, Vanguard, and other commercial engines paired with any major plunger pump brand.

What if my pressure washer needs a part that isn't in stock?

Ameritech maintains a full OEM parts inventory for the brands we service. For specialty parts not in stock, our typical lead time is 3–7 business days from major suppliers. We provide a written estimate including part lead times before authorizing repair so there are no surprises.

Can Ameritech install the Belt Box on my existing pressure washer?

Yes. Belt Box installation is one of our most common custom service jobs. Drop off or ship your machine to our Tampa facility, and our technicians will install the Belt Box, verify pump RPM, and run a full operational test before return. Standard install time is 1–2 hours of labor. Learn more about the Belt Box →

You Might Also Need

Related services and Ameritech offerings.

The Belt Box Conversion

Convert gear-drive to belt-drive in 1–2 hours. Doubles pump life. We can install on shipped-in equipment or sell the kit for self-install.

Learn More →

Custom Trailer Builds

Need a complete rebuild or new custom rig? Our build team designs and assembles full pressure washing trailer systems in-house.

Start a Build →

Maintenance Knowledge Base

Routine maintenance schedules, common issue diagnostics, and how to extend pressure washer pump life. Help you avoid the next service trip.

Read Guides →

Bring Your Equipment to a Tampa Service Center That Understands It.

Our service team has been repairing commercial pressure washing equipment since 1988. We service equipment from any manufacturer — but we're authorized for the major commercial brands, which means warranty work happens here without the back-and-forth.