Every custom Ameritech rig is scoped, built, and tested in our 10,000 sq. ft. Tampa facility. We ship completed trailers and skid systems across the U.S. for fleet wash, mobile detailing, concrete cleaning, food-plant sanitation, and specialty industrial applications. No drop-shipped components, no third-party assembly, no surprises at delivery.
Single-axle and tandem-axle pressure washing trailers built around your duty cycle. Pump, engine, tank, reels, and storage configured to your spec sheet.
Compact skid-mount pressure washing systems that drop into trucks, vans, or fixed bays. Hot or cold, gas or electric, 4–10 GPM platforms.
Diesel-fired hot water systems for grease, oil, gum, and food-plant work. Schedule 80 coil, high-temp components, integrated burner controls.
EPA-compliant wastewater recovery for parking decks, fuel islands, and concrete work. Vacuum boom, multi-stage filtration, holding tanks.
Two-, three-, and four-gun configurations for crews running multiple operators off one platform. Independent pressure regulation per gun.
Purpose-built rigs for trucking, transit, RV dealer, and mobile detail operators. Reels for length, tank capacity for route, organized storage.
Pick the closest configuration for each field. Anything you're not sure about, leave it on "Recommend for Me" and our build team will work it out on the discovery call. This is a starting point, not a final spec sheet.
30-minute call to understand your operation, duty cycle, target jobs, transport setup, and budget. We bring spec recommendations to the call, not generic options.
Written spec sheet sent within 48 hours. Pump, engine, tank, reels, plumbing, electrical, and finish all itemized. Reviewed line-by-line before quote.
Fixed written quote and build timeline. Deposit secures the build slot. Component lead times confirmed before deposit so the schedule is real.
Every component installed by Ameritech techs in our Tampa shop. No outsourced sub-assembly. Build photos shared during major milestones.
Full operational test under load before the rig leaves. Pickup in Tampa, enclosed transport delivery, or freight ship. Operator orientation included.
Built for a mid-Atlantic transit fleet operator running 60+ vehicle washes per week. Dual reels, 525-gal tank, hot water diesel-fired.
Compact skid for a Tampa concrete cleaning operator running residential driveways and commercial flat-work. Surface-cleaner ready, single-reel layout.
Compact A-Frame on a single-axle trailer for a Florida-based mobile detailer. Smaller water tank, organized chemical storage, dual reels.
Schedule-80 coil hot water skid for a Southeast food-plant sanitation contractor. 200°F output, integrated burner controls, three-phase electric.
Three-operator rig for a Texas property management contractor handling roof soft-wash, building exteriors, and concrete on the same job site.
Full wastewater recovery rig for a Northeast parking-deck cleaning contractor. Vacuum boom, multi-stage filtration, 200-gal holding tank.
| Configuration | Typical Starting Range |
|---|---|
| Skid System (cold water, single reel) | $5,500 – $8,500 |
| Skid System (hot water, single reel) | $11,000 – $16,500 |
| Single-Axle Trailer Rig (cold water) | $9,000 – $19,500 |
| Single-Axle Trailer Rig (hot water) | $13,000 – $26,000 |
| Tandem-Axle Trailer Rig (multi-gun, hot water) | $28,000 – $42,000 |
| Reclaim / Recovery Trailer (full system) | $35,000 – $62,000 |
| Belt Box Pre-Installation Add-On | $1,200 – $1,600 |
Submitting this form starts a real conversation, not a sales call. Our build team reviews your spec, asks the questions that catch most operators by surprise, and returns a written quote with timeline.
Bolt-on belt-drive conversion that cuts pump RPM by 50% and roughly doubles pump life. Available as a pre-installed option on most custom builds.
Learn About the Belt Box →Full-service Tampa repair center for custom-built rigs and equipment from any manufacturer. Authorized warranty for 10 major commercial brands.
View Service Capabilities →Operator-grade content on PSI vs GPM, pump selection, hot vs cold water, surface-cleaning, chemicals, and starting a pressure washing business.
Browse the Knowledge Base →Our build team has been speccing custom pressure washing equipment since 1988. If you're already shopping a quote from another manufacturer, bring it to us. Most operators end up with a better-spec'd rig at a lower delivered cost after a 30-minute conversation.
Submit a quote request to start the conversation, or call directly to talk through configuration with the build team.
Request a Custom Quote — or call (813) 978-0809 for spec conversation